IDENTIFICATION OF SAFE DISTANCE AGAINST DISPOSAL SLOPE
IDENTIFIKASI JARAK AMAN TERHADAP LERENG DISPOSAL
Keywords:
disposal, jarak aman, kestabilan lereng, overburdenAbstract
Initial mining activities need to remove overburden so it is necessary to find a safe and efficient location to avoid areas that still contain economical excavated materials. This disposal or stockpiling must be arranged considerably to meet the geotechnical design requirements. Other factors, influenced by economics and safety are very important in planning the disposal site. The purpose of this study is to determine the safe distance to disposal for PE pits based on laboratory tests. The study showed that the optimal disposal values for PE pits were 14˚ for a slope height of 50 m, 13˚ for a slope height of 80 m, and 12˚ for a slope height of 100. The Stability of the slope will be better by reducing the slope angle of the disposal slope. The analysis shows that the safe distance to disposal for PE pits is 45 m slope height with 50 m safety distance, 50 m slope height with 69 m safety distance, and 76 m slope height with 100 m safety distance. The higher the disposal slope, the smaller the slopes formed, and the greater the safety distance if the slope height increases.
Downloads
References
Arif, I., (2021). Geoteknik Tambang Edisi Kedua. Gramedia Pustaka Utama, Jakarta, Hal 211-275.
Bargawa, W.S., (2018).Edisi Kedelapan Perencanaan Tambang, Kilau Book, Yogyakarta, Hal 87-100
Gunawan, R., Nurkhamim., dan Izza F, R,. (2021). Overview Metode Perencanaan Pengelolaan Lahan Bekas Penambangan, Prosiding Nasional Rekayasa Teknologi Industri dan Informasi XVI Tahun 2021, Hal 345-350.
Gunawan, R., Fadli., dan Nurkhamim., (2021), Rencana Pascatambang Tambang Batubara PT. Tubindo Kabupaten Bulungan Provinsi Kalimantan Utara, Jurnal Teknologi Mineral FT UNMUL. Vol. 9, No. 2, Hal 1-9.
Hardiansyah., (2021), Analisis Kestabilan Lereng Disposal pada Area Bekas Tambang di Pit Diamond PT. Ceria Nugraha Indotama Desa Ponrewaru Kecamatan Wolo Kabupaten Kolaka Provinsi Sulawesi Tenggara, Skripsi, Universitas Halu Oleo, Kendari.
Herdianto A, A., dan Heriyadi, B.,(2019), Analisis Rancangan Lereng Area Pembuangan Pit D Pada PT. Aman Toebilah Putra Kabupaten Lahat Provinsi Sumatera Selatan, Jurnal Bina Tambang, Vol. 4, No. 2, Hal. 21-30.
Hidayati, A. M. (2012). Analisa Stabilitas Lereng Pada Campuran Pasir Dan Tanah Lempung Dengan Menggunakan Permodelan di Laboratorium. Jurnal Rekayasa Sipil (JRS- Unand), Vol 8 No. 1, Hal 1-10.
Jalil, A., Nagara, D, B., dan Wicaksono, E., (2022), Kajian dan evaluasi Geoteknik Pada Tambang Terbuka Batubara PT. Dizamtra Powerindo Kecamatan Merapi Barat , Kabupaten Lahat, Provinsi Sumatera Barat. Prosiding Nasional Rekayasa Teknologi Industri dan Informasi XVII Tahun 2022, Hal 145-153.
Liu, T., Xu, D., Shi, L., Qu, L., & Ji, K. (2022). Trapezoidal collapse model to calculate the height of the overburden collapse zone in coal seam mining: An example from Guo'Jiahe Coal Mine, Western China. Energy, 256, 124609. https://doi.org/10.1016/j. energy.2022.124609.
Loilatu, R., dan Iswandaru., (2022), Analisis Kestabilan Lereng Andesit Menggunakan Metode FEM pada PT. X, Jurnal Riset Teknik Pertambangan, Vol 2 No 1. Hal 15-24
Londong, C., Nurhakim., Dwiatmoko, M.U., dan Melati, S., (2016), Perencanaan Disposal Perencanaan Disposal Pada Pada Tambang Tambang Terbuka Terbuka Batubara, Jurnal Geosapta, Vol 02 No. 01. Hal. 49-54.
Noorchayo,A., Toha.,dan Bochori., (2019), Stabilitas Lereng Disposal Serelo Selatan di PT. Bumi Merapi Energi, Jurnal Pertambangan, Vol 3. No 4. Hal 44-51.
Republik Indonesia. (2018). Keputusan Menteri ESDM No 1827 Tahun 2018 Tengtang Pedoman Pelaksanaan Kaidah Pertambangan yang baik. Jakarta: Sekretariat Menteri Energi dan Sumber Daya Minereal.
Xu, N., Zhang, J., Tian, H., Mei, G., & Ge, Q. (2016). Discrete element modeling of strata and surface movement induced by mining under open-pit final slope. International Journal of Rock Mechanics and Mining Sciences, 88, 61-76. https://doi.org/ 10.1016/j.ijrmms.2016.07.006
Yuswanto, A., (2021), Rancangan Lokasi Dan Geometri Lereng Disposal Menggunakan Metode Bishop Dan Fellenius Studi Kasus Pada Blok F PT. Jagad Rayatama, Skripsi, Universitas Halu Oleo, Kendari.
Zhang, L., Chen, Z., Nian, G., Bao, M., & Zhou, Z. (2023), Base friction testing methodology for the deformation of rock masses caused by mining in an open-pit slope. Measurement, 206, 112235.
Published
How to Cite
Issue
Section
Copyright (c) 2023 Abdul Jalil, Risal Gunawan, Eko Wicaksono, Waterman Sulisyana Bargawa
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
